compact size external 16mm, suitable for very small jars / tanks/ bottles.
for some reasons you may prefere the old model bigger size (20mm diameter) article T9S2 + the hose fitting T9S3.
The article with the internal bore of 2.8 mm, is suitable for fuel hoses pipes with the inner hole of 2 to 3,5 mm
The article with the internal bore of 4 mm, is suitable for petrol pipes with the inner hole of 3 to 5 mm
The fittings are composed of 2 parts: one internal part with thread and hose connector, one outside with female thread .
They are mounted at any point of the can, the wall of the can/tank (max 2 mm thickness.) needs to be pierced by 7.5 mm. and the hole must be carefully deburred,
It slips inside the male part and the female part is screwed from the outside.
The sealing is obtained by the pressure between the two screwed parts and by the particular form.
Mounting does not need sealant
The Kit is composed by 3 couples of M/F (inside/outside parts on the the bottle ) fittings.
example of mounting on a 50cc bottle
