our ABM system, Medium Flex Bars, allows a more dinamic handling
while maintaining an high level of self stability
WHAT IS NEW ON 140 and 150 rigid cage MINIPLANE :
A bigger prop turning slowly offer a good thrust with lower noise.
In general every performance is improved, with a better efficiency of the propeller (higer aspect ratio), more thrust is obtained with less consumption.
A larger propeller, however, needs adequate protection that we can not obtain with the classic solution of the Miniplane flexible cage.
The solution we offer now is a propeller protection cage built with a high strength aluminum drop-shaped aerofoil profile with a 20x10 mm profile.
The new reduction ratios make the propeller turn more slowly, only 2000 (16/75 ) or 2200 (17/75) rpm at maximum rpm, and thanks to the best efficiency, in horizontal flight the noise is greatly reduced, making the flight more relaxing for the pilot and less stressful for who follows him from the ground. The new lightweight composite Helix prop becomes a mandatory choice for this paramotor, impossible to achieve the same performance with such a large wooden propeller.
A further advantage, which will please many users, is that the profile used for this propeller keeps performance better as air density decreases, in practice it lose less thrust as the height increases.
Comparing to Classic Miniplane frame the new frame is narrower, consequently the ABM arms are tighter. To adapt the width to the needs of all pilots we can supply spacers of 1 or 2 cm; consequently changes the length of the pivot screw on the frame.
- - composite propeller 2 blades of 130 or 140 cm
- - Diameter cage 140 cm (130 cm prop) or 150cm (140 cm prop), 4 sections + base
- - Weight 20,55 Kg (20x10 profile)
- - Reductor 19/73 or 17/75 for 130 cm prop
- - reductor 17/75 or 16/76 for 140 cm prop
- - arm spacers 1 or 2 cm
- - prop spacer 3 cm, 6 cm on request
- - Miniplane Harness size M or L, Dudek S-M or L-XL, Miniplane LIGHT harness L (fit 3 sizes from M to XL)
When ordered the L size harness, the machine may be delivered with L size arms (few cm longer) on request.
Colors : please visit the category page Miniplane
(samples, there are other availlable)
|| harness options :
||seat size (cm)
wide x deep
wide x deep
our standard harness,
1 big pocket under the seat, 2 side pockets,
42 mm main belt,
loops belts for a front rescue container and speed-bar pulleys
| 34 x 25(+7)
||37 x 27(+8)
SLT paramotor harness
25 mm main belts,
size expander zip on the back
removable zipped side rescue container that can be put on both sides( the zipped rescue container and/or the the side pocket must be ordered separatelly, you can find it on our harness section)
|| 38 x 32(+8)
heavier than our standard harness but very confortable thanks to abundant padding
25 mm main belts
availlable in 3 versions :
- with 2 side pockets + 1 under the seat
- 1 side emergency pocket + 1 side pocket (S version) + 1 under the seat
- or rescue pocket under the seat (U version)
| 38 x
more informations about the harness in the harness section
Here you can find more informations on the choice of Miniplane the best for you.
informations about the ABM arm spacers here