our historic Miniplane with high stability hang point PSF, revised with M4 frame and rigid cage divisible in 4 parts
WHAT IS NEW ON 140 rigid cage MINIPLANE :
Following to many customer requests we make the 4 parts rigid cage also for the L size miniplane, in this machine is possible to mount the 125 cm prop but we suggest the 130.
2 possible choice of reductors : 19/73 (1/3,84) or 17/75 (1/4,41)
A bigger prop turning slowly offer a good thrust with lower noise.
In general every performance is improved, with a better efficiency of the propeller (higer aspect ratio), more thrust is obtained with less consumption.
A larger propeller, however, needs adequate protection that we can not obtain with the classic solution of the Miniplane flexible cage.
The solution we offer now is a propeller protection cage built with a high strength aluminum alloy, drop-shaped aerofoil profile 20x10 mm.
The new reduction ratios make the propeller turn more slowly, only 2200 (17/75) rpm at maximum engine rpm, and thanks to the best efficiency, in horizontal flight the noise is greatly reduced, making the flight more relaxing for the pilot and less stressful for who follows him from the ground. The new lightweight composite Helix prop becomes a mandatory choice for this paramotor, impossible to achieve the same performance with such a large wooden propeller.
A further advantage, which will please many users, is that the profile used for this propeller keeps performance better as air density decreases, in practice it lose less thrust as the height increases.
- - composite propeller 2 blades of 130 cm
- - Diameter cage 140cm, 4 sections + base
- - Weight 20,55 Kg (20x10 profile)
- - Reductor 17/75 or 19/73
- - prop spacer 3cm, you may order 6 cm also
- - harness black
- - Harness size M, L or XL
Colors : please visit the category page Miniplane
|| harness options :
||seat size (cm)
wide x deep
wide x deep
our standard harness,
1 big pocket under the seat, 2 side pockets,
42 mm main belt,
loops belts for a front rescue container and speed-bar pulleys
| 34 x 25(+7)
||37 x 27(+8)
25 mm main belts,
size expander zip on the back
removable side rescue container that can be put on both sides( the rescue container and/or the the side pocket must be ordered separatelly, you can find it on our harness section)
|| 38 x 32(+8)
heavier than our standard harness but very confortable thanks to abundant padding
25 mm main belts
availlable in 3 versions :
- with 2 side pockets + 1 under the seat
- 1 side emergency pocket + 1 side pocket (S version) + 1 under the seat
- or rescue pocket under the seat (U version)
| 38 x
more informations about the harness in the harness section
Here you can find more informations on the choice of Miniplane the best for you.