this model is based on our classic Miniplane frame with the well known flex cage.
We build a frame suitable for the engine you have chosen.
This article is not an universal solution for all different engines, each one have different size,weight, anchor points ..
there are small differences between the various models, the most obvious concern of the motor anchor points, the position of the tank, and torque compensation due the direction of rotation (clockwise or counterclockwise) and engine geometry (weight balance).
Our constructive choice on the geometry of the frame is to hold the propeller away from the pilot, for this reason some of the engines in the market are not easily adaptable to Miniplane frame.
Among the engines that we chose, almost everyone can be mounted with a spacer for the propeller, which we recommend to mount, it helps to achieve the correct propeller position without mooving the engine back too much.
This article is available in size L, 125 cm propeller, or L1 cage for 130 cm prop, in this case we highly recommend the use of the cage reinforcement T2-RG, that you may use also in the L size,
if you need a stronger prop protection we offer another solution with a rigid cage.
this article is a complete paramotor, with swing arms, tank, harness, carabiners, throttle,
without engine and propeller,
to complete the machine :
you may order the engine by us,
you will need to order the propeller and the proper screws also.
Colors : please visit the category page Miniplane
(samples, there are other availlable)
N.B. The frame Miniplane classic is "reversible" only in the ABM configuration, so the engines with the opposite torque (counter-clockwise propeller rotation) can be mounted only through the configuration ABM.