paramotor

our historic Miniplane with high stability hang point PSF,
revised with M4 frame and rigid cage divisible in 4 parts

WHAT IS NEW ON 140 and 150 rigid cage MINIPLANE :

A  bigger prop turning slowly offer a good thrust with lower noise.
In general every performance is improved, with a better efficiency of the propeller (higer aspect ratio), more thrust is obtained with less consumption.
A larger propeller, however, needs adequate protection that we can not obtain with the classic solution of the Miniplane flexible cage.
The solution we offer now is a propeller protection cage built with a high strength aluminum alloy, drop-shaped aerofoil profile 20x10 mm. Following to many customer requests we make the 4 parts rigid cage also for the L size MINIPLANE , in this machine is possible to mount the 125 or 130 cm prop.

There are different possible choice of reductors : 19/73 (1/3,84) , 17/75 (1/4,41) or 16/76 

The new reduction ratios make the propeller turn more slowly, only  2200 (17/75) rpm at maximum engine rpm, and thanks to the best efficiency, in horizontal flight the noise is greatly reduced, making the flight more relaxing for the pilot and less stressful for who follows him from the ground. The new lightweight composite Helix prop becomes a mandatory choice for this paramotor, impossible to achieve the same performance with such a large wooden propeller.

A further advantage, which will please many users, is that the profile used for this propeller keeps performance better as air density decreases, in practice it lose less thrust as the height increases. 

M4 frame is narrower than the classic frame, nevertheless the rider has a lot of comfortable space thanks to the particular shape of the new PSF arms.
The arms have different lengths and assembly sizes following the size of the harness.

 

standard features:

• - composite propeller 2 blades of 130 cm or 140 cm
  
• - Diameter cage 140cm (130 cm prop) or 150 cm (140 cm prop), 4 sections + base
  
• - Weight 20,55 Kg (20x10 profile)
  
• - Reductor 19/73 or 17/75 for propeller 130 cm
  
• - reductor 17/75 or 16/76 for propeller 140 cm
• - prop spacer 3cm, you may order 6 cm also
• - Harness size M, L or XL

Please note : 

 M4  frame is only for PSF arms, means that is not possible to modify the machine to ABM or use the tandem bar.

If you need that option we may make a special version.

  Colors : please visit the category page Miniplane
  

 more informations about the harness in the harness section

Here you can find more informations on the choice of Miniplane the best for you.